Increased world settings limits  

Description
This mod increases the max limit for a lot of world settings to 1000, and sets the min limit for some to 0. Note that some settings may require additional modifications, for example 'Max Pals Working At Base' will require the Increased base amount and worker pals mod.

Requirements
This mod utilizes UE4SS xinput and has only been tested on the single player Steam version of Palworld. Gamepass users are reporting success with the Gamepass installation method outlined below.

Installation
Steam

• Download the zip and extract it in Palworld\Pal\Binaries\Win64\Mods.
• Add the following line to the mods.txt file in the Palworld\Pal\Binaries\Win64\Mods directory.
  vuxIncreasedWorldSettings: 1

Gamepass
Thanks to users Crazyon69 and AirborneMuffins for finding this solution and sharing it in the comments section of the Remove flying stamina cost mod.

• Download the zip and extract it in C:\Users\"UserName"\AppData\Local\Pal\Saved\Config\WinGDK\Mods.
  Alternatively, some users are reporting the mod should be installed in the following location: (C:\XboxGames\Palworld\Content\Pal\Binaries\WinGDK\)
• Add the following line to the mods.txt file in the C:\Users\"UserName"\AppData\Local\Pal\Saved\Config\WinGDK\Mods directory.
  vuxIncreasedWorldSettings: 1

If you get stuck, this video may help Modding Palworld | Game Pass Guide | Install, Config & Use Mods in Palworld Game Pass.
UE4SS xinput installation steps
Steam

• Download UE4SS_Xinput_v2.5.2.zip
• Extract to Palworld\Pal\Binaries\Win64
• Delete everything from the mods folder except for the mods.txt (optional)
• Open up the mods.txt and remove everything (optional, only if you removed the mods in the step above

Gamepass
Thanks to users Crazyon69 and AirborneMuffins for finding this solution and sharing it in the comments section of the Remove flying stamina cost mod.

• Download UE4SS_Xinput_v2.5.2.zip
• Extract to C:\Users\"UserName"\AppData\Local\Pal\Saved\Config\WinGDK\
  Alternatively, some users are reporting UE4SS should be installed in the following location: (C:\XboxGames\Palworld\Content\Pal\Binaries\WinGDK\)
• Rename xinput1_3 to xinput1_4
• In the UE4SS-settings.ini file, set bUseUObjectArrayCache to false.
• Delete everything from the mods folder except for the mods.txt (optional)
• Open up the mods.txt and remove everything (optional, only if you removed the mods in the step above

Troubleshooting
If you are experiencing crashes, users Crazyon69 and sammaeru have posted a solution in the comments section of the Remove flying stamina cost mod.

• In the UE4SS-settings.ini file, set bUseUObjectArrayCache to false.

If the mod doesn't seem to be loading, try these steps:

• In the UE4SS-settings.ini file, scroll down to the [Debug] heading and enable the consoles by changing their values from '0' to '1'
• Boot the game and check that the mod is correct loading in the console, towards the end it should say something like "Starting Lua mod 'modName" (modName is a placeholder, it should be the name of the folder)
• If the console isn't opening at all, try renaming the xinput file back to xinput1_3

For Steam users - if you have tried both of the above, watch the 'How To EASILY Install Mods - Palworld' video and make sure everything is correct.

Multiplayer
This may or may not work on servers, people have been reporting UE4SS scripts working, and a lot of people have been saying otherwise. This forum post may help.

For coop P2P multiplayer, it may work if everyone installs the mod on their client. If you do attempt to get it working in multiplayer, sharing your outcome (whether successful or failure) in the comments section helps.

Incompatibilities
This mod will most likely be incompatible with any other mod that changes the same values.